Questions? Feedback? powered by Olark live chat software

Z4eX Extreme 3 Frequency Zapper

Write a Review
MSRP: $115.00
Was: $99.95
Now: $89.95
(You save $25.05 )
Calculated at Checkout

Product Overview

Includes Wrist Straps and a Battery.
An inexpensive Hulda Clark zapper with a small size, small price and very high quality. GUARANTEED to work according to Dr. Clark's specs, with 3 frequencies to choose from and a TWO YEAR WARRANTY!

The Z4eX Extreme 3 Frequency Zapper

The Z4eX Extreme Zapper is an upgraded version of the very popular Zapper C3i. The Zapper C3i was widely sold for a number of years but was discontinued by the manufacturer with the release of the Z4eX Extreme. Both models are based on the original zapper design published by Dr. Hulda Clark.

The Z4eX Extreme Zapper is made using solid-state ground plane circuitry produced on a world-class assembly-line. It produces an output that is completely stable at ALL frequencies and should last for many, many years, even with daily use.

It is powered by a standard 9 volt battery and comes complete with a set of cables and wrist-straps for easy, hands-free use almost anywhere.

The owners of have used zappers personally since 1995 and sold well over 12,000+ zappers since 1999. They consider the Z4eX Extreme Zapper to be one of the best, most reliable, high quality zappers on the market, with a failure rate of less than .1%!

As a matter of fact the Z4eX Extreme Zapper is SO RELIABLE we offer a TWO YEAR WARRANTY against manufacturing defects!

Many zappers sell for hundreds of dollars. What's the difference between the Z4eX and most of the others?

  • The Z4eX uses much better construction than most zappers on the market
  • It's made on an ISO-9002 SMD assembly line to military level quality
  • It has significantly fewer warranty issues (NO DEFECTS!)
  • It has a more accurate signal output due to more precise components
  • It is GUARANTEED to accurately meet Dr. Clark's latest specifications
  • Includes 3 easy-to-select frequencies: 30KHz, 2.5KHz, and 15Hz
  • Small, compact design
  • Wrist straps and cable are included (an optional alligator cable is needed for use with handholds)
  • Includes everything needed to begin zapping immediately

The Z4eX Extreme Zapper uses the latest specs from Dr. Clark and delivers a high quality precise output for years of use at one of the lowest prices on the market. If you need a Zapper and don't want to spend a bundle on the fancy features of other zappers, this is the zapper we highly recommend.

The top of the Z4eX

Wrist Straps & Cable

This is an environmentally friendly GREEN PRODUCT! It contains no lead and is made with the preservation of our environment in mind!

The Z4eX Extreme Zapper has a red low battery indicator LED that only comes on when the battery is low. The green Power LED comes on when the unit is turned on and stays on the entire time. It has a steady glow when using the 30KHz and 2.5KHz frequencies, but will flash rapidly at the 15Hz frequency setting.

PLEASE NOTE: If you are planning on purchasing/using copper handholds you will normally need to buy the optional Zapper Cable with Alligator Connectors. The standard cable that comes with the Z4eX Extreme Zapper uses a dome snap connector that WILL NOT WORK with most handholds.

VERY IMPORTANT: As with ANY zapper that uses wrist straps, make sure the straps stay moist the entire time you are zapping. If the straps dry out they will NOT conduct the frequencies into the skin and you will be wasting your time.

We have a bundled set that includes a pair of our polished Copper Pipe Handholds and an Alligator Cable that are designed to work with the Z4eX Extreme Zapper. Click Here for details.

THREE EASY-TO-SELECT FREQUENCIES: 30KHz, 2.5KHz, and 15Hz Highest Power 0.25v positive offset with STABILIZED WAVE TECHNOLOGY Includes elastic, conductive wrist straps with coil cords Extra-flexible cable with easy-to-use banana plug connectors and dome snaps Low battery indicator LED EXTERNALLY accessible battery compartment (believe it or not MANY other units require unscrewing the lid to replace the battery)
Simple snap-in battery compartment that is keyed so that it's impossible to put the battery in wrong Micro-circuitry design allows a small, ergonomic, custom-molded case
Even the label is made from polycarbonate and the screws are made in Switzerland No detail has been overlooked A superb execution of Dr. Clark’s Zapper, mass produced by real engineers at a very low price, so anyone who wants to experiment can do so with confidence.