The SOTA Silver Pulser ZBB5/SP5
Please note: All SOTA products, including the Silver Pulser, Magnetic Pulser, Bio-tuner, Water Ozonator, and LightWorks are ONLY available for shipment directly from SOTA. To receive our NEW Customer discount price you MUST be a NEW SOTA customer and use the discount code shown below when placing your order.
The Silver Pulser SP5 is the main component of Dr. Robert C. Beck's widely-used protocols. The Silver Pulser is a two-in-one device that includes both a microcurrent stimulator and a Colloidal Silver generator in one convenient unit. Gentle microcurrent (micro-pulsing) stimulation is the primary and most important part of the Beck Protocols for most people due to it's wide-ranging effects. The benefits of Colloidal Silver are widely known and you can make it yourself for pennies per gallon using the Silver Pulser.
Each Silver Pulser is a professionally designed, quality device that is thoroughly tested on an oscilloscope and guaranteed to operate per Dr. Bob Beck's specifications. The Silver Pulser easily generates 16 ounces of high-quality Ionic Colloidal Silver of between 5-8 ppm (part per million) in about 20 minutes. Smaller amounts are even quicker! The Ionic Colloidal Silver particle sizes generated are mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (verified on a Scanning Electron Microscope).
The Silver Pulser is based on research by Dr. Bob Beck but it is often confused with Dr. Hulda Clark's Zapper (click here for more info on the zapper). The two products are both frequency based but they function in completely different ways, operating under different principles, and will typically give different results. They are NOT the same, so be careful when the name zapper is used and make sure whether you looking at a Beck pulser (Magnetic Pulser or Silver Pulser) or a Clark zapper.
The
Silver Pulser is a
very reliable product that has been designed for years of daily use and comes with a
THREE YEAR WARRANTY against defects and/or failure.
Important! Please Read: The Silver Pulser is ONLY available as a drop-ship item from the manufacturer, SOTA Instruments, Inc. What this means is that ALL orders for the Silver Pulser are processed and shipped by SOTA directly to the customer from SOTA's own warehouse.
Payment for the Silver Pulser is also handled by SOTA, which means you will be sent to SOTA's secure website before being asked for your payment information.
To receive our NEW CUSTOMER DISCOUNT PRICE
you MUST use the DISCOUNT CODE: CA52570.
TO PURCHASE A SILVER PULSER CLICK HERE
This will take you to SOTA's website to place the order with SOTA.
To purchase by telephone please call
SOTA toll-free at 800-224-0242.
If you have never purchased from SOTA before remember to use the DISCOUNT CODE for your Special Price!
Please remember: Our DISCOUNT CODE is only valid for NEW SOTA customers. It can be used for your first purchase of ANY of SOTA's major product, and can be passed along to your family and friends so they can also receive a discount on their first purchase from SOTA. This discount code NEVER expires and can be used any time for new SOTA customers, so keep it handy.
Remember: SOTA handles both the payment and shipping for all SOTA products that you purchase.
The
Silver Pulser has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31 volts DC peak per cycle. Peak to peak voltage is 62 volts. It uses a single 9-volt battery. The Silver Pulser circuit board is gold plated for the highest quality and performance. All solders and fluxes are food-grade for highest safety and purity.
The Silver Pulser was designed around a custom-built plastic enclosure that allows for ease-of-use and easy replacement of the 9 volt battery that powers it. A slide-off lid allows you to easily change the battery in just a minute or so.
A rotating Thumbwheel Switch on the left side of the
Silver Pulser is used to turn the unit on and off and varies the intensity of the "Bio-Stimulator Probe" output. A Green LED Light comes on to let you know when the Silver Pulser is turned on. A flashing Yellow LED light indicates there is adequate "Bio-Stimulator" output and comes on only when current is flowing correctly through the probes. A Red LED Light is used to indicate a low battery condition. Plus, an Orange LED is used to indicate Ionic/Colloidal Silver generation. The Orange LED comes on only when current is flowing through the (included) silver wires correctly when making colloidal silver.
The Silver Pulser uses a 6-pin DIN style jack to connect the Stimulator Probes and the silver wires that are used to make colloidal silver. A separate jack is used to connect an optional AC Wall Adaptor when making colloidal silver. The production of colloidal silver is very power intensive, so it is highly recommended that you use an AC adapter to prevent frequent battery changes. Due to safety issues and government regulations the AC adapter can NOT be used for Blood Electrification.
A set of Cotton Sleeves is included to be placed over the Bio-Stimulator Probes for help in maintaining a good connection when moistened. Please note: the cotton sleeves MUST be used with the micro-pulsing procedure. The Silver Pulser is packaged in a custom soft carrying case for easy storage and portability.
Each Silver Pulser comes complete with the following:
- Operating Instructions
- Two (2) .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes
- One (1) Silver Wire Holder
- One (1) High Grade Plated Bio-Stimulator Probes
- One (1) Velcro/Neoprene Strap
- One (1) Velcro Arm Strap
- One (1) Scotchbrite scrubber pad
- One (1) 2 oz. Dark Glass Dropper Bottle
- Six (6) Cotton Probe Sleeves
- One (1) 9 Volt Alkaline Battery
- One (1) Soft Carrying Case
- CE Certification
- 3 Year Parts and Labor Warranty on internally mounted components
